Everyone knows how to flash mobile phones, but do you know how to flash tablets? Nowadays, many people use tablets. Tablets generally have dual systems. Dual-system electronic devices are more likely to freeze than mobile phones. When the tablet freezes, we can flash it. How to flash a tablet? Next, the editor will take Teclast a10 as an example to teach you how to flash a tablet. In addition, rooting is risky, so everyone should proceed with caution.
Teclast a10 tablet flashing tutorial:
1. Now go to Teclast official website to download a driver and find the firmware of Teclast a10 tablet. Generally, there is an ID number on the back of the computer, and the firmware is downloaded based on the ID number. Download this: "Android4.2.2-V5.03" version of the firmware. If you are new to flashing your phone, it is best to back up the system firmware before flashing, because some people will fail to flash their phone and have to restore the original system.
2. Now turn on the USB debugging function of the tablet and connect the Teclast a10 tablet to the computer. Open the flash software, click "One-click flash" and click "Upgrade now" according to the prompts. One thing to note here is that you must ensure that the USB debugging on your phone is turned on. If it is not turned on, the Teclast a10 tablet cannot be connected to the computer.
3. Now click on upgrade and one-click flashing. The Teclast a10 tablet will be automatically detected, and then we will operate step by step according to the prompts of the computer flashing software. Format the tablet, clear all the data inside, and expand the memory of the Teclast a10 tablet so that new programs and systems can be downloaded and installed.
4. Next, just keep the data cable connected. Teclast a10 tablet computer will start to automatically update the system and flash the phone. We just need to wait for the progress bar to advance. During this process, do not unplug the data cable connecting the tablet and the computer for any reason, because if the flashing is disconnected midway, the tablet will completely fall into a state where it cannot be turned on and cannot be used, that is, in name only of a flat brick.
5. After the flashing is completed, the computer will pop up a prompt to click to complete. We click to complete and then exit the device from the computer. Now just restart the Teclast a10 tablet.
The above is the flashing tutorial for Teclast a10 tablet. Have you learned it? There are two types of Teclast a10 tablet. The colors are black and white and the size is relatively small at only 7 inches. Taipower is the best domestic tablet computer brand in my country, bar none. Taipower's tablet sales rank first in our country. Taipower's configurations are very high-end and the quality is relatively good. However, the pixels of this brand of tablets are relatively low, so it is a bit hard on the eyes to use.